Based on 1718 reviews
60%
(1039)
31%
(537)
6%
(109)
2%
(27)
0%
(6)

VERY HIGH QUALITY USED IN VERY WET CONDITIONS. DIM NICELY WITH STANDARD LED DIMMER. VERY NICE CONSTRUCTION VERY GOOD ANODIZED BLACK WITH A TRIM RING TO HIDE MOUNTING ALSO CAME WITH STAINLESS HARDWARE. I BOUGHT 12 OF THESE AND ALL ARE PERFECT.

These lights are very bright and the controls are very easy to use. I will definitely be buying more of them

The barrel power connection to transformers 12v to conductors screw down end are just nice and I have used them for connecting Led lights and for blue tooth speakers, etc. Very handy.

Never can find the right size of this type of power connector but these will solve the problem.

These are great adapters for connecting loose wire to barrels. Security cameras, led lights, Arduino, etc. Have fun!

These have come in super handy for connecting power supplies and batteries. Polarity is well labeled. No duds encountered yet, no stripped screws.

Exactly as pictured, these work well and fit many standard dc power jacks on devices.

Needed for LED tape light installation and they were cheaper than specialty lighting sites. Screws work good and tighten fully.

As advertised excellent value great for making 12 LV connections

I have several strings of LED strip lights cut to size. In one application for ambient lighting I always felt the accent light was not bright enough. My options were to just replace the whole setup or add more lights to the strip. These connectors allow me to easily just add a duplicate strip, doubling the number of LEDs and now producing the brightness I wanted.

Easy to use and simple installation. Trim broken LED strips at the indicated splicing location and insert ends into clips.

I snagged my Govee LED light strips while moving things around and thought I had just wasted a good set and they would end up in the trash. They are deemed un-trimmable and can not be shortened or spliced. Well I am glad that it was wrong. I cut the ends off from the broken section as seen in the first photo and inserted them into the clip. In the second photo you can clearly see lights are on both sides of the clip. I double checked the strips functionality and ran it through different lighting sequences and found that there were no issues. Lights functioned as normal and I saw no difference from before the break.

Absolutely saved my LED strips.

Highly recommend. I will always keep some handy

We ended up going with brighter strip lights, but these connectors made it easy to add on additional lights. You just make sure the ends are lined up and use a pair of pliers to clamp them together. It��s a pretty straightforward and simple task.

I had soldered my lights together and enclosed them in a protective cover. Unfortunately, the solder joint failed. This repaired the issue, but the repair fitting is slightly wider than the original, making it a tight fit within the protective sleeve and cover. The discrepancy is minimal and barely noticeable